|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Terbinafine-loaded biodegradable polymeric systems for topical administration
Pokorná, Tereza ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Tereza Pokorná Title of Diploma thesis Terbinafine-loaded biodegradable polymeric systems for topical administration Supervisor: PharmDr. Eva Šnejdrová, Ph.D. In the diploma thesis the released properties of solid dispersions with terbinafine, based on polyesters of D,L-lactic acid and glycol acid, branched with pentaerythritol and tripentaerythritol are studied. The theoretical part deals with solid dispersions, their classification and methods of preparation, methods of drug dissolution testing, properties, effect, use of terbinafine and preparations containing terbinafine. In the experimental part, solid dispersions were prepared by the melting method. The drug was incorporated into the polyester in the form of a hydrochloride or a base in a concentration of 10 % or 20 %. Some systems were plasticized with 30% triethyl citrate. Thin layers were formulated from solid dispersions, and drug dissolution tests were performed on phosphate buffer pH 7.4 at 37 řC. Assay of terbinafine released was performed spectrophotometrically at 223 nm and ultra-high performance liquid chromatography. Based on the results of this diploma thesis, it can be clearly stated that the suitable carrier of terbinafine...
|
|
|
Adhesive and rheological properties of chitosan-based mixtures
Korpasová, Marie ; Šnejdrová, Eva (advisor) ; Mužíková, Jitka (referee)
CHARLES UNIVERSITY IN PRAGUE Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical technology Name and surname: Marie Korpasová Title of diploma thesis: Adhesive and rheological properties of mixtures based on chitosan Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Diploma thesis deals with evaluation of rheological and adhesive properties of compounds for matrix tablets formulation, based on Chitosan with addition of retardant compound. The retardant compound consists of Sodium Alginate and Hypromellose in concentrations of 30 %, 40 % and 50 %. Theoretical part describes Chitosan, Sodium Alginate and Hypromellose. As next is division of matrix tablets. Theoretically is also described evaluation of rotational, oscillational and adhesive testing which was used in practical part. From viscosity curves can be seen, that viscosity is decreasing with increasing stress. Viscosity increases with increasing concentration of Sodium Alginate and Hypromellose. Oscillational testing is better for gel characterization, because it provides lower stress on test samples. Samples of given compound were prepared by hydrating with phosphate buffer of pH 6,8. Coefficient of consistency K and index flow rate n characterize rheological behaviour of gels. Viscoelastic compounds behave like solids with plastic...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Rheological and adhesive properties of matrix for freeze-dryied oral vaccines
Longinová, Vendula ; Šnejdrová, Eva (advisor) ; Šklubalová, Zdeňka (referee)
CHARLES UNIVERSITY Faculty of Pharmacy in Hradec Kralove Department of Pharmaceutical Technology Name: Vendula Longinová Title of diploma thesis: Rheological and adhesive properties of matrix for freeze-dryied oral vaccines Supervisor: PharmDr. Eva Snejdrova, Ph.D. The aim of the diploma thesis was to evaluate the rheological and adhesive properties of formulations for lyophilized oral vaccines and lyophilized tablets formulated on the basis of dextran, iota-carrageenan or trehalose. The theoretical part characterizes dosage forms for application to the oral cavity, lyophilized preparations and excipients for mucoadhesive preparations. In the experimental part, rheological and mucoadhesive properties on a rotary rheometer were evaluated. Formulations containing iota-carrageenan showed higher viscosity, higher gel stiffness, lower degree of relaxation and higher yield stress than trehalose formulations. All lyophilized tablets showed sufficient adhesion to a standardized mucin support in vitro. The performed experiments represent pilot tests of flow, viscoelastic and mucoadhesive properties of lyophilized tablets for oral administration of pertussis vaccine. The contribution of the work is the design of a testing methodology for the final formulations during stability tests. Key words: lyophilized...
|
|
|
Medicated polymer systems based on branched PLGA derivatives
Martiška, Juraj ; Dittrich, Milan (advisor) ; Kubová, Kateřina (referee) ; Kvítek, Libor (referee)
Charles University, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical technology Candidate Mgr. Juraj Martiška Supervisor doc. RNDr. Milan Dittrich, CSc. Title of Doctoral Thesis Medicated polymer systems based on branched PLGA derivatives This work is focused on the use of originally synthesized poly(DL lactic-co-glycolic acid) (PLGA) derivatives with relatively low molar mass, and linear, star, or comb architecture as promising biodegradable carriers for prolonged or targeted drug release systems. Thermal properties of these polyesters were evaluated by thermogravimetric analysis and differential scanning calorimetry. Polyesters were used for nanoparticles formulation by nanoprecipitation method, which has been optimized with emphasis on organic solvent selection, polyester concentration, phase mixing speed, and stabilizer selection. After method optimization, nanoparticles with encapsulated terbinafine, a typical drug of the BCS class II, were prepared. Multiple parameters such as particles size, polydispersity index, zeta potential, encapsulation efficiency, loading capacity, and morphology were monitored. Spherical morphology was observed using scanning electron microscopy. The hydrophobicity and the polyester concentration revealed the main impact on the nanoparticles size...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Adhesive and rheological properties of chitosan-based mixtures
Korpasová, Marie ; Šnejdrová, Eva (advisor) ; Mužíková, Jitka (referee)
CHARLES UNIVERSITY IN PRAGUE Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical technology Name and surname: Marie Korpasová Title of diploma thesis: Adhesive and rheological properties of mixtures based on chitosan Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Diploma thesis deals with evaluation of rheological and adhesive properties of compounds for matrix tablets formulation, based on Chitosan with addition of retardant compound. The retardant compound consists of Sodium Alginate and Hypromellose in concentrations of 30 %, 40 % and 50 %. Theoretical part describes Chitosan, Sodium Alginate and Hypromellose. As next is division of matrix tablets. Theoretically is also described evaluation of rotational, oscillational and adhesive testing which was used in practical part. From viscosity curves can be seen, that viscosity is decreasing with increasing stress. Viscosity increases with increasing concentration of Sodium Alginate and Hypromellose. Oscillational testing is better for gel characterization, because it provides lower stress on test samples. Samples of given compound were prepared by hydrating with phosphate buffer of pH 6,8. Coefficient of consistency K and index flow rate n characterize rheological behaviour of gels. Viscoelastic compounds behave like solids with plastic...
|
|
|
Rheological behaviour of mixtures for freeze-drying
Vavřich, Dominik ; Šnejdrová, Eva (advisor) ; Šklubalová, Zdeňka (referee)
CHARLES UNIVERSITY Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Name of author: Dominik Vavřich Title of diploma thesis: Rheological behaviour of mixtures for freeze-drying Supervisor: PharmDr. Eva Šnejdrová, Ph.D. The diploma thesis deals with the evaluation of rheological properties of aqueous dispersions of fish gelatin and carrageenans intended for lyophilization. Theoretical part of this work is dedicated to the characterization of fish gelatin and carrageenans which were used for preparation of the mixtures in experimental part of this work. Characterization of an oral cavity from an application of medicaments point of view and an orally disintegrating tablets of the medicine with a focus on the lyophilized tablets are also presented. Mixtures of the fish gelatin and the carrageenans were prepared in the experimental part of the work. Their rheological behaviour employing an absolute rotational rheometer Kinexus Pro+ was measured and evaluated. Also, the testing of the rheological characteristics of these materials transformed into the freeze-dried tablets was performed. Nonlinear viscous curves were obtained, and they were mathematically evaluated by the Power law model. Pseudoplastic behaviour of the mixtures can be derived from the results of acquired...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
guest ::
